Car ties must maintain 2 characteristics for long-term normal work

These two characteristics are shaking resistance and heat resistance, which are all closely related to the running state of the car. We know that during the entire operation of the car, the car engine will generate heat, and this heat will be dissipated through heat dissipation. The device is released into the surrounding indoor space, so as a bundle of many routes and tube bodies of the car, the car tie must be able to withstand high temperature and great anti-shake ability.

The styles of car ties have many raw materials but are more uniform

In order to integrate into the compact overall design of the car, there are many parts inside the car system integration that need to use car ties. It is very likely that up to a dozen types of car ties will appear in the same car. Under such circumstances, the variable and adjustable car tie molds are of great economic value. For the movable molds of tens of thousands of products, if one mold can produce different products, there is no doubt that it may be huge. It is beneficial for the enterprise to control costs.

Products such as car ties often fail to meet the standards. One of the key reasons is that these products are usually in the shape of fine and micro-end pieces. It is difficult to produce and process such products. Therefore, polyester ties are usually All will set the shrinkage rate.

Car ties are all over the place in the car

The vast majority of automotive cable ties belong to the type of plastic. This type of cable tie is generally used in a part of each integrated vehicle wiring harness. One has the function of finishing, and the other has the function of tightening the connection. Under the function, the entire distance of the car can be connected into a close one.



The working condition of the car stipulates the car tie

The car engine will emit a lot of heat during the whole process of operation. Generally, the temperature under the casing is very high. Therefore, it is stipulated that the car tie can have the ability to resist high temperature. In addition, which roads of the car will encounter, Therefore, in many cases, the compressive strength of the car tie must be high, so as to ensure that the components are not easy to loosen during the whole process of operation and ensure safe driving.

The same ubiquitous stainless steel car tie

Although plastic car ties are the most commonly used in automobiles, stainless steel car ties are also used in various places in the interior of automobiles, such as the bundling of exhaust pipes. The welding process was generally used before. It is neither durable nor cost-effective. When choosing a car tie, this problem should not be completely eliminated.

We all know that the tightness and anti-fouling regulations of the small box of the automobile rotating shaft of the cable tie are very high, and the general standard parts cannot achieve a certain seal. Therefore, it is necessary to use the automobile cable ties. The metal cable ties make it not only Tighten and reduce product cost.

One is that the manufactured cable ties cannot be buckled or penetrated into the cable tie holes. Most of these problems are due to the short stroke arrangement of the front buckle, the displacement of the hole when the hole is broken, or the cooperation between the concave groove of the rear buckle and the cable tie hole. If it is not caused, such problems can be dealt with by increasing the stroke arrangement of the front buckle or adjusting the position of the concave groove and tie hole of the rear buckle. Properly carry out the extension to deal with it. The third is that the lever does not come out and is easy to be stuck. It may be caused by the lack of lubricating fluid or the damage of the electromagnetic coil of the gear lever. The difficulty can be solved by adding lubricating fluid or replacing the spring. .

In everyone's daily life, polyester cable ties are mostly used for bundling items. This type of cable ties is convenient and convenient to use, and there are many types that can be used for bundling various objects, so they have suffered a lot of use. People's unanimous five-star praise, and the acceptance rate is getting higher and higher. With the expansion of market demand, many people are devoted to the field of cable ties, and want to get a share of the pie.