Ji Jin is a professional engaged in various types of plastic mold design, manufacture and injection molding processing of production-oriented enterprises.
Indication method of nominal size, such as: 3X100, 4X200, 5X300, etc.; Indication method of actual size (width X length in mm) For example: 2.5X100, 3.5X200, 4.8X300, etc.
Nominal size specification marking or calling (for example: 3X100) 3 (number without decimal point) does not represent the actual width of the product, 100 represents the length is 100mm; usually 2.5X100, 2.2X100, 2.0X100, 1.8X100 can be marked Or called into 3X100.
The actual dimensions covered by the following nominal widths are organized by industry rules:
The actual width of 3X series national standard products is 2.5mm, and the actual width of non-standard products is generally 2.2mm, 2.0mm, 1.8mm
The actual width of 4X series national standard products is 3.5mm-3.6mm, and the actual width of non-standard products is generally 3.3mm, 3.0mm, 2.7mm
The actual width of 5X series national standard products is 4.6mm-4.8mm, and the actual width of non-standard products is generally 4.2mm, 4.0mm, 3.8mm
The actual width of 8X series national standard products is 7.0mm-7.6mm, and the actual width of non-standard products is generally 6.0mm, 5.8mm, 5.2mm
The actual width of the 10X series national standard products is 8.8mm—9.0mm, and the non-standard products generally use the 8X series national standard 7.6mm.
It can be seen from the above that there is an essential difference between the number with a decimal point "." in front of the nylon cable tie specification labeling method and that without a decimal point. Please master the product parameters when selecting the cable tie model.